Operation
6.4 Command sources
Drive converter cabinet units
194 Operating Instructions, 07/07, A5E00288214A
Terminal assignment for the "PROFIdrive NAMUR" default setting
When you choose the "PROFIdrive NAMUR" default setting, the terminal assignment is as
follows (as with option B00):
'212
'2&20
'21&
1$085WHUPLQDOEORFN
21G\QDPLF
212))VWDWLF
2))G\QDPLF
6ORZHU
)DVWHU
5(6(7
,QWHUORFN
&RXQWHUFORFNZLVH
3RZHUGLVFRQQHFWLRQ
5HDG\
0RWRUUXQQLQJ
6SHHGVHWSRLQW
P$
0RWRUIUHTXHQF\
P$
0RWRUFXUUHQW
P$
)DXOW
37&VHQVRU
VLJQDO FORFNZLVHSKDVHVHTXHQFH
VLJQDO FRXQWHUFORFNZLVHSKDVHVHTXHQFH
0
$;
39
',
',
',
',
',
',
',
$,
$
$2
$
$2
$,
$;
˽
Figure 6-16 Terminal assignment for the "PROFIdrive NAMUR" default setting
Control word 1
The bit assignment for control word 1 is described in "Description of the control words and
setpoints".
Status word 1
The bit assignment for status word 1 is described in "Description of the status words and
actual values".
Switching the command source
The command source can be switched using the LOCAL/REMOTE key on the AOP30.
To Next Page
Loading...
