Operation
6.8 PROFINET IO
Drive converter cabinet units
242 Operating Instructions, 07/07, A5E00288214A
In the following interactive screen enter a freely selectable device name and the IP address
and subnet mask.
The subnet screens must match before STARTER can be run.
Figure 6-39 STARTER - Edit Ethernet nodes
After selecting the "Assign name" button, the following confirmation will appear if the
assignment was successful.
Figure 6-40 STARTER - Successful assignment of the device name
After selecting the "Assign IP configuration" button, the following confirmation will appear if
the assignment was successful.
To Next Page
Loading...
