Device overview
2.5 Type plate
Drive converter cabinet units
26 Operating Instructions, 07/07, A5E00288214A
Type plate data (from type plate above)
Table 2-2 Data on the type plate
Specification Value Explanation
Input
3 AC
380 – 480 V
239 A
Three-phase connection
Rated input voltage
Rated input current
Output
3 AC
0 – 480 V
210 A
Three-phase connection
Rated output voltage
Rated output current
Temperature range
0 – 40 °C Ambient temperature range within which the cabinet unit can operate under 100
% load
Degree of protection
IP20 Degree of protection
Duty class
I I: Duty class I to EN 60146-1-1 = 100 % (continuously)
(with the specified current values, the cabinet unit can operate continuously
under 100 % load)
Cooling method
AF A: Cooling medium: air
F: circulation method: forced cooling, drive unit (fan) in the device
Weight
Weight of the cabinet unit
Explanation of the option short codes
Table 2-3 Explanation of the option short codes
Input options
L26 Main circuit breaker incl. fuses for output currents < 800 A
Output options
L08 Motor reactor
L10 dV/dt filter with Voltage Peak Limiter
L15 Sinusoidal filter (only for the voltage range 380 V - 480 V 3 AC to 200 kW)
Input and output options
M70 EMC shield bus (cable connection from below)
Motor protection and safety functions
L45 EMERGENCY STOP pushbutton in cabinet door
L57 EMERGENCY STOP category 0 (230 V AC or 24 V DC, uncontrolled stop)
L59 EMERGENCY STOP category 1, 230 V AC, controlled stop
L60 EMERGENCY STOP category 1 (24 V DC, controlled stop)
L83 Thermistor motor protection unit with PTB approval (alarm)
L84 Thermistor motor protection unit with PTB approval (shutdown)
L86 PT100 evaluation unit (for 6 PT100 sensors)
L87 Insulation monitoring
M60 Additional shock-hazard protection
To Next Page
Loading...
