Siemens SINUMERIK 840D

3
File and Program Management 08.97
3.3 User memor
y
3
840D
NCU 571
840D
NCU 572
NCU 573
FM-NC 810D 840Di
Siemens AG 2000. All rights reserved
3-128
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA)
−
04.00 Edition
3.3 User memory
Initialization programs
These are programs with which the working memory
data are initialized.
The following file types can be used for this:
name
_TEA Machine data
name
_SEA Setting data
name
_TOA Tool offsets
name
_UFR Zero offsets/frames
name
_INI Initialization files
name
_GUD Global user data
name
_RPA R parameters
Data areas
The data can be organized in different areas in
which they are to apply. For example, a control can
use several channels (not the SINUMERIK FM-NC,
810D CCU1, 840D NCU 571) and can usually use
several axes. The following areas are available:
Identifier Data areas
NCK
NCK-specific data
CH<n>
Channel-specific data
(n specifies the channel number)
AX<n>
Axis-specific data (n specifies the
number of the machine axis)
TO
Tool data
COMPLETE
All data