Siemens SINUMERIK 840D

15
Tables 04.00
15.2 List of s
y
stem variables
15

Siemens AG 2000. All rights reserved
15-530
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
15.2.10 Magazine location data
Identifier Type Description: System variable/value range/index Part pro Sync O S
$TC_MPP1
INT $TC_MPP1[n,m]
Location class
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPP2
INT $TC_MPP2[n,m]
Location type
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPP3
BOOL $TC_MPP3[n,m]
Adjacent location consideration on/off
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPP4
INT $TC_MPP4[n,m]
Location status
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPP5
INT $TC_MPP5[n,m]
Buffer magazine: Location class index
Real magazines: Wear group number
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPP6
INT $TC_MPP6[n,m]
T-no. of the tool at this location
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPP7
INT $TC_MPP7[n,m]
Adapter number of tool adapter at this location
n: Physical Magazine number
m: Physical location number
RW 5