Siemens SIPROTEC 4 7SD80 User Manual

Protocol-dependent Functions
Protocol → IEC
60870-5-10
3, single
IEC
60870-5-10
3, redundant
IEC 61850
Ethernet (EN
100)
PROFINET
Ethernet
(EN100)
Profibus DP DNP 3 TCP
Ethernet
(EN100)
DNP3.0
Modbus
ASCII/RTU
Function ↓
Operational meas-
ured values
Yes Yes Yes Yes Yes Yes Yes
Metered values Yes Yes Yes Yes Yes Yes Yes
Fault recording Yes Yes Yes No No Yes No
Remote protection
setting
No Yes Yes No No No No
User-defined indica-
tions and switching
objects
Yes Yes Yes Yes Yes Yes Yes
Time synchroniza-
tion
Yes Yes Yes Yes Yes Yes Yes
Messages with time
stamp
Yes Yes Yes Yes Yes Yes Yes
Commissioning aids
Data transmission
stop
Yes Yes Yes No No No No
Creating test
messages
Yes Yes Yes No No No No
Physical mode Asynchro-
nous
Asynchro-
nous
Synchronous Asynchro-
nous
Asynchronous
Transmission mode cyclic/event cyclic/event cyclic/event cyclic cyclic cyclic/event cyclic/
event
(DNP)
cyclic
(Modbus)
Baud rate 1 200 to
115 000
2 400 to
57 600
up to 100
MBaud
up to 100
MBaud
up to 1,5
MBaud
(Fiber-optic)
6 MBaud
(RS485)
up to 100
MBaud
9600 to
57600
(DNP)
300 to
57600
(Modbus)
Type RS232
RS485
Fiber-optic
RS485 Ethernet TP
Ethernet
Fiber-optic
Ethernet TP RS485
Fiber-optic
(double
ring)
Ethernet TP
Ethernet
Fiber-optic
RS485
Fiber-optic
E.7
Default Settings and Protocol-dependent Functions
E.7 Protocol-dependent Functions
332 SIPROTEC 4, 7SD80, Manual
E50417-G1100-C474-A2, Edition 02.2018

Siemens SIPROTEC 4 7SD80 Specifications

General

Brand	Siemens
Model	SIPROTEC 4 7SD80
Category	Power distribution unit
Language	English