Siemens SIPROTEC 5 V8.30 User Manual

[tdio216x, 1, en_US]
Figure 3-59
IO216 – Connection Diagram
Input Module IO230
Description
The terminals for the following are located on the IO230 input module:
•
48 binary inputs
The connections are distributed over six 10-pole terminals.
i
i
NOTE
The IO230 input module has a group switching for the switchover of threshold values. The threshold values
of the binary inputs can be switched in groups of 8 only:
•
Group of 8 x.1, x.2, x.3, x.4, x.25, x.26, x.27, x.28
•
Group of 8 x.5, x.6, x.7, x.8, x.29, x.30, x.31, x.32
•
Group of 8 x.9, x.10, x.11, x.12, x.33, x.34, x.35, x.36
•
Group of 8 x.13, x.14, x.15, x.16, x.37, x.38, x.39, x.40
•
Group of 8 x.17, x.18, x.19, x.20, x.41, x.42, x.43, x.44
•
Group of 8 x.21, x.22, x.23, x.24, x.45, x.46, x.47, x.48
3.2.17
3.2.17.1
Electronic Modules
3.2 Input and Output Modules of the Modular Devices
106 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-J, Edition 08.2020

Siemens SIPROTEC 5 V8.30 Specifications

General

Brand	Siemens
Model	SIPROTEC 5 V8.30
Category	Power distribution unit
Language	English