For further information on connecting to the time synchronization, see chapter 6.6 Communication Interfaces
in the Technical Data.
Integrated Ethernet Interface (RJ45)
This terminal is used to load the device with DIGSI 5 using Ethernet. This terminal also enables straight-
forward IEC 61850 Ethernet communication (including GOOSE) or communication with another protocol via
Ethernet, for example, for connecting an external RTD unit.
For further information on the integrated Ethernet interface, see chapter 6.6 Communication Interfaces in the
Technical Data.
Electronic Modules
3.3 Power-Supply Module of Non-Modular Devices (7xx81, 7xx82)
SIPROTEC 5, Hardware Description, Manual 127
C53000-G5040-C002-J, Edition 08.2020
To Next Page
Loading...
Need help?
General
