(1) Push the holder, push the sealing cap to the back and remove it
(2) Unlock the eject lever
(3) Remove the SDHC memory card
²
Unpack the new SDHC memory card.
Do not touch the contacts of the SDHC memory card with your fingers.
²
Insert the new SDHC memory card.
When inserting, make sure that the SDHC memory card is properly aligned: The side with the contacts
must be facing up, the side with the sticker facing down.
[dw_insert_SDHC, 1, --_--]
Figure 5-21 Inserting the SDHC Memory Card into the Device
CAUTION
Exercise caution when removing the SDHC memory card from a defective device.
If you want to remove the SDHC memory card from a defective device and to insert the card into another
healthy device and if the data must be kept, note the following:
Noncompliance with the specified measures can result in loss of data.
²
To avoid a reformatting of the SDHC memory card, you must first import the parameters of the defec-
tive device to another device.
²
You can insert the SDHC memory card in the other device and use it only then.
²
The recordings on the SDHC memory card from the defective device can still be read in the other
device.
²
Insert the sealing cap back again.
²
Resume operation of the device.
Working on the Device
5.6 SDHC Memory Card
210 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-J, Edition 08.2020
To Next Page
Loading...
Need help?
General
