3 Mounting and Commissioning
310
7SD610 Manual
C53000-G1176-C145-4
Figure 3-24 Local measured values in the WEB-Monitor - Examples of plausible measured
values
Figure 3-25 Remote measured values in the WEB-Monitor - Examples of plausible mea-
sured values
Polarity check If the device is connected to voltage transformers, the local measured values already
allow a polarity check.
A load current of at least 5% of the rated operational current is still required. Any di-
rection is possible but must be known.
www . ElectricalPartManuals . com
To Next Page
Loading...
