Siemens SIPROTEC 7SD610 - Transmission of Binary Information (Optional)

4.6 Transmission of Binary Information (optional)
337
7SD610 Manual
C53000-G1176-C145-4
4.6 Transmission of Binary Information (optional)
Remote commands
Number of possible remote commands 4
The operating times depend on the communication speed.
The following data require a transmission rate of 512 kBit/s.
The operating times refer to the entire signal path from entry via binary inputs until output of commands via output
relays.
Operating times, total approx. minimum 8 ms
typical 12 ms
Dropout times, total approx. typical 19 ms
www . ElectricalPartManuals . com