A.1 Ordering Information and Accessories
369
7SD610 Manual
C53000-G1176-C145-4
converter (i.e. 3 kV for CC-CU). They are connected between the communication con-
verter and the communication line.
Name Order Number
Isolation transformer, test voltage 20 kV 7XR9516
GPS
Name Order No.r
GPS receiver with antenna and cable 7XV5664-0AA00
Power supply 7XV5810-0BA00
External
Converters
Optical interfaces for Profibus and DNP 3.0 are not possible with surface mounted
housings. Please order in this case a device with the appropriate electrical RS485 in-
terface, and the additional OLM converters listed below . Note: The OLM converter
6GK1502-3CB10 requires an operating voltage of 24 VDC. If the operating voltage is
> 24 V DC the additional power supply 7XV5810-0BA00 is required.
Interface used Order device with addition-
al module/OLM converter
Profibus DP double ring Profibus DP RS485 /
6GK1502-3CB10
DNP 3.0 820 nm DNP 3.0 RS485/
7XV5650-0BA00
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General