Siemens SIPROTEC 7SD610 - Page 371

A.1 Ordering Information and Accessories
371
7SD610 Manual
C53000-G1176-C145-4
Plug-in Connector Plug-in Connector Order No.
2-pin C73334-A1-C35-1
3-pin C73334-A1-C36-1
Mounting Brackets
for 19" Racks
Name Order No.
a pair of mounting rails; one for top, one for bottom C73165-A63-D200-1
Battery
Lithium battery 3 V/1 Ah, type CR 1/2 AA Order No.
VARTA 6127 101 501
Interface Cable An interface cable and the DIGSI operating software are required for the communica-
tion between the SIPROTEC 4 device and a PC or laptop: The PC or laptop must run
MS-WINDOWS 95, MS-WINDOWS 98, MS-WINDOWS NT 4, MS-WINDOWS 2000,
MS-WINDOWS ME or MS-WINDOWS XP PRO
Name Order No.
Interface cable between PC and SIPROTEC, Cable with 9-
pin male/female connectors
7XV5100-4
DIGSI Operating
Software
Software for setting and operating SIPROTEC 4 devices
Name Order No.
DIGSI, basic version with licenses for 10 computers 7XS5400-0AA00
DIGSI, complete version with all option packages 7XS5402-0AA00
Graphical Analysis
Program SIGRA
Software for graphical visualization, analysis, and evaluation of fault data (option
package of the complete version of DIGSI)
Name Order No.
SIGRA graphical analysis program, full version with
license for 10 computers
7XS5410-0AA00
DIGSI REMOTE 4
Name Order No.
Software for remotely operating protection devices via a
modem (and possibly a star coupler) using DIGSI (option
package of the complete version of DIGSI)
7XS5440-0AA00
www . ElectricalPartManuals . com