Figure 3-1 Configuration of SIMATIC S7/PCS7 with SIWAREX FTC
3.7 Commissioning and Service with SIWATOOL FTC_B
For commissioning and for service, there is a special program - SIWATOOL
FTC_B for belt scales and Windows operating systems.
The program enables commissioning of the scale without having to understand
automation technology. During a service procedures, you can analyze the
processes in the scale and test them with the help of a PC. Reading the
diagnostics buffer from the SIWAREX FTC is very helpful in analyzing events.
Besides complete access to all parameters, memory or print-outs of the weighing
file, the program can create weighing curves as well.
3-8 SIWAREX FTC
To Next Page
Loading...
