Siemens SIWAREX FTC - Table 4-4 Digital Input Connections

HARDWARE CONFIGURATION AND ASSEMBLY
The fun
ctionality of each input can be defined with parameters.
DI status is indicated with and LED on the front of the SIWAREX FTC.
!
Warning
The inputs may only be activated if your functional allocation is known and the
activation will not cause any harm.
Termination Clamp Signal Comment
X1.1 DI 1 Parameter definable function
X1.2 DI 2 Parameter definable function
X1.3 DI 3 Parameter definable function
X1.4 DI 4 Parameter definable function
X1.5 DI 5 Parameter definable function
1.6 DI 6 Parameter definable function
X1.7 DI 7 Parameter definable function
X1.8 2M Reference ground for digital inputs
Table 4-4 Digital input connections
Figure 4-5
Digital inputs
SIWAREX FTC
4-19