Siemens SIWAREX FTC - RS 485 Interface; Connecting the Remote Display from Siebert; Table 4-9 Rs 485 Connection; Figure

4.4.11 RS 485 Interface
Termination Clamp
Signal Comment
X1.21 485a Input Ta
X1.22 485b Input Tb
X1.23 485a Output Ta
X1.24 485a Output Tb
X1.25 RTa Termination resistor RTa
X1.26 RTb Termination resistor RTb
Table 4-9 RS 485 connection
Figure 4-1
0 RS 485 connection
4.4.12 Connecting the Remote Display from Siebert
One or m
ore Siebert Type S102 displays can be connected to the RS485 interface.
The displays can only be used for displaying weights in "Non automatic weighing
instrument" operating mode.
4-24 SIWAREX FTC