42/238
Building Technologies Modular Heating Controller RMH760B CE1P3133en
HVAC Products 4 General settings 05.02.2007
4.5 Text entries
4.5.1 Device name and file name
The text for the device name appears in the welcome picture.
Main menu > Commissioning > Settings > … or
Main menu > Settings > Texts
Operating line Range Factory setting
Device name Max. 20 characters
File name Max. 20 characters
The text of the device name entered here appears on the start page in place of Welcome.
The file name is only of importance in connection with the ACS7… plant operating
software; the text can be edited there.
4.5.2 Function block
Specific designations can be assigned to the following types of function blocks: Boiler,
main controller, primary controller, DHW, heating circuit, and time switch. The setting is
made on the relevant function block.
Main menu > Commissioning > Settings > … or
Main menu > Settings > Main controller
Operating line Range Factory setting
Main controller
Max. 20 characters
A maximum of 20 characters can be entered.
The change of text designation for the boiler only affects the menu headings indicated,
but not the fault texts and not the text of operating lines.
4.5.3 Texts for the fault inputs
The texts for the fault inputs are locally displayed and also transmitted via bus.
In addition to the predefined fault inputs, there are 4 universal fault inputs, 3 digital and
freely usable boiler-related fault inputs available.
• The text for the universal fault inputs can be edited via Main menu > Settings > Faults.
• The text for the boiler-related faults can be edited where the boiler settings are
made: Main menu > Settings > Boiler > Fault settings
Main menu > Commissioning > Settings > … or
Main menu > Settings > Faults > Fault input 1 (or 2, 3 or 4)
Operating line Range Factory setting
Fault input 1 Max. 20 characters
[Fault inp 1] fault
Fault input 2 Max. 20 characters
[Fault inp 2] fault
Fault input 3 Max. 20 characters [Fault inp 3] fault
Fault input 4 Max. 20 characters [Fault inp 4] fault
4.5.4 Electronic business card
The text of the electronic business card is displayed as an info picture. The electronic
business card can be deactivated via “Extra configuration“.
Setting
Device name
File name
Setting
(example of main control-
ler)
Setting
To Next Page
Loading...
