TXP CLC Course
Setting up module parameters
Properties
Module parameter
Cut
Deselect
Copy
Move
Connect
Open connection
Go down
CPU References
System
Module parameter
a) Click
the module
b)
Module parameters
I Input
O Output
P Parameter
Displaying
When pressed, the
internal value is
shown on diagram
TTD activation
Port position as it
appears on block
A
P
P
A
W
T
L
M
Z
Configurable
alarm class
REV
value
Negated
signal
Parameter
Port activation
SF w/o frame: static port within basic symbol
P w/o frame: parameter cannot be activated
PF/SF: alternately chosen (PF = parameter
function; SF = software function)
-- means port is deactivated
7
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
3
To Next Page
Loading...
