Siemens TXP-CLC - TXP Industrial Ethernet Features

TXP-CLC Course
3
TXP Industrial Ethernet
CP
CP
CP
CP
CP
CP
CP
CP
CP
CP
SIMATIC S5
SIMATIC S5
AS
AS
Communication without limits using the
Industrial Ethernet local area network
WAN
WAN
Industrial Ethernet
Industrial Ethernet
Industrial
Industrial
Ethernet
Ethernet
bridge
bridge
OM
OM
gateway
gateway
ES
ES
The AS620, OM650, and ES680 subsystems of TXP are interconnected via the
bus system Industrial Ethernet, which features the following advantages:
• High availability
• Single-fault tolerance
• Standardized protocol architecture in accordance with ISO/OSI
• Ability to use the optimum transfer medium (drop cable, twisted pair, or
fiber-optic cable)
• High-performance transfer rate (100/10Mbit/s)
• Support for the use of redundant TXP participants
• Bus management and diagnostics functions
• Scale-ability with respect to plant size
• Wide area coverage
• Bridges, which are used for:
• implementing backbones
• connecting to other networks
• increasing coverage
• safety de-coupling
• load de-coupling
• WAN coupling
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
1