TXP CLC Course
5
KKS for Documentation
The KKS identification system is not only used for equipment but also for
documentation. This includes identification codes for documentation and signal
standards.
Identification Codes for Documentation
The KKS system includes identification codes for documentation, which allows a
way to link documentation with equipment. Function codes, equipment codes,
documentation types, and drawing types are all used to identify the
documentation associated with a piece of equipment.
An example of a documentation identification code is shown in Figure 5. The
documentation identification code is usually found in the drawing title block.
Documentation Identification Code
YF = MYB01 EC001 / L1
Drawing Type or
Serial Number
Function Code and Equipment Code
Process Identification Prefix
Documentation Type
Figure 5 - Documentation Identification Code
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
19
To Next Page
Loading...
