TXP CLC Course
Generation for online transfer
After code has been initially loaded into an AP, subsequent changes can be
generated and transferred online, which means changes can be loaded while the
AP is running. Care must be taken to ensure that the changes will not have
adverse affects on the process.
To accomplish this from the main ES 680 window select:
Generators then AP
then Code generation for transfer.
Enter the AP number. Always enter 0 for the APF number since we do not have.
Do not tolerate open signals or source connectors if you plan to transfer the
code. Choose to start the online-handler and click on
OK to start code
generation.
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
20
To Next Page
Loading...
