Siemens TXP-CLC - AT Function Block Parameters

TXP-CLC Course
8
Parameters
Name Description
AEB Analog input range
GL Smoothing input signal
EASW Default analog signal value
EU Input range monitoring
MOD Modification input signal
LV1 Limit value 1
LV2 Limit value 2
LV3 Limit value 3
LV4 Limit value 4
HYS Hysteresis
ABZE Sampling period
DELT Delta
EUZE Delay time input signal monitoring
EAS Default analog signal
LRV Physical lower limit
URV Physical upper limit
UNIT Engineering units
GSB1 Limit signal 1 off/on
GSB2 Limit signal 2 off/on
GSB3 Limit signal 3 off/on
GSB4 Limit signal 4 off/on
ULLL1 Limit value 1 upper/lower
ULLL2 Limit value 2 upper/lower
ULLL3 Limit value 3 upper/lower
ULLL4 Limit value 4 upper/lower
EGSW1 Default limit value 1
EGSW2 Default limit value 2
EGSW3 Default limit value 3
EGSW4 Default limit value 4
EGS1 Use default limit signal 1
EGS2 Use default limit signal 2
EGS3 Use default limit signal 3
EGS4 Use default limit signal 4
ANS Threshold for signal loss
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
3