Since the equipment explained in this manual has a variety of uses, the user and those
responsible for applying this equipment must satisfy themselves as to the acceptability of
each application and use of the equipment. Under no circumstances will Siemens
Westinghouse Power Corporation be responsible or liable for any damage, including
indirect or consequential losses resulting from the use, misuse, or application of this
equipment.
The text, illustrations, charts and examples included in this manual are intended solely to
explain the use and application of the TXP control system. Due to the many variables
associated with specific use or applications, Siemens Westinghouse Power Corporation
cannot assume responsibility or liability for actual use based upon the data provided in
this manual.
No patent liability is assumed by Siemens Westinghouse Power Corporation with
respect to the use of circuits, information, equipment, or software described in this
manual.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, including electronic, mechanical, photocopying or otherwise,
without the prior express written permission of Siemens Westinghouse Power
Corporation.
This document is the property of and contains Proprietary Information owned by
Siemens Westinghouse Power Corporation and/or its subcontractors and suppliers. It is
transmitted in confidence and trust, and the user agrees to treat this document in strict
accordance with the terms and conditions of the agreement under which it was provided.
This manual is printed in the USA and is subject to change without notice.
Siemens Westinghouse Power Corporation
Training Center
1345 Ridgeland Parkway Suite 116
Alpharetta, GA 30004
To Next Page
Loading...
