Siko AP10S - 3 Ch: LCD Backlight Red; 3 Dh: Key Function Enable3: Configuration Enable Via Keyboard; 3 Eh: Acknowledgement Settings

Communication via SIKONETZ 5
AP10S Date: 04.09.2017 Art. No. 87826 Mod. status 269/17 Page 38 of 48
6.9.34 3Ch: LCD backlight red
The red LCD backlight can be set via parameter 3Ch.
Parameter address
3Ch
Description
LCD backlight red
Access
rw
EEPROM
yes
Programming mode
yes
Data type
UNSIGNED 8
Default
1
Data content
0 = Off
1 = On
6.9.35 3Dh: Key function enable3: Configuration enable via keyboard
Parameter 3Dh indicates whether configuration via key actuation is enabled.
Parameter address
3Dh
Description
Key enable
Access
rw
EEPROM
yes
Programming mode
yes
Data type
UNSIGNED 8
Default
1
Data content
0: configuration disabled
1: configuration enabled
6.9.36 3Eh: Acknowledgement settings
Parameter 3Eh serves for determining the key to be used as acknowledgement key.
The setting is only relevant in the alpha-numeric display mode.
Parameter address
3Eh
Description
acknowledgement settings
Access
rw
EEPROM
yes
Programming mode
yes
Data type
UNSIGNED 8
Default
0
Data content
0: key
2: Up and Left key