1-1
This publication describes how to install and check out the 4190 Information
Management System (IMS). The 4190 IMS is a node on a 4120 Network used
to annunciate and control the points contained within the network. If you are
installing additional Network Interface Cards (up to four can be installed in one
IMS), you can control up to four networks from one common IMS. The 4190
graphical interface software provided is a Microsoft Windows®-based
application that makes it easy to interact with the network by entering input
through a keyboard, mouse, or touchscreen.
This chapter discusses the topics listed in the following table. Refer to the page
number listed after the topic for information on that topic.
Topic See Page #
Getting Started 1-2
Unpack the Equipment 1-2
Inspect the Equipment 1-2
Inventory the Equipment 1-2
Related Documentation 1-2
Chapter 1
Before You Begin
Introduction
In this Chapter
To Next Page
Loading...
Need help?
General
