3-6
Note: Tape drives are not supported in the Run-time software.
1. Insert the IOMEGA CD into the computer CD Rom drive.
2. Select the Install icon.
3. Follow the prompts on the screen.
Modify the WIN.INI file as follows:
1. Click on the Start button and select Programs, then MS DOS Prompt.
2. At the C:\WINDOWS> prompt, type EDIT WIN.INI and press ENTER.
The WIN.INI (Windows Initialization) file is displayed on the text editor
screen.
3. Scroll to the line reading “Run=C:\QBWIN\DITTO.EXE.”
4. Place a semi-colon (;) at the beginning of this line. This will prevent this
command from executing when Windows starts.
Please refer to Installing the Software Security System, 579-825 for instructions
on installing the Key Security Service. This service is necessary for access to
the program.
Continued on next page
Installing the Software, Continued
Installing the Optional Tape
Drive Software from CD-ROM
Editing the Windows WIN.INI
file for Optional Tape Drive
Installing the Security Service
To Next Page
Loading...
Need help?
General
