2-2
For a Microsoft® Windows® 2000-based computer platform to operate
properly as a IMS, it must meet or exceed the following minimum hardware
requirements:
• An IBM-compatible personal computer with a Pentium® III (700 Mhz
minimum) Processor
• 6 Gb (or greater) Hard Drive
• 3.5-inch (89 mm), high-density floppy disk drive
• 1 parallel port
• 2 serial ports
• 128 Mb of RAM minimum
• SVGA graphics controller
• SVGA Monitor (with or without touchscreen)
• PS/2 mouse
• CD drive (CD-RW recommended)
• Fan monitor card (required for 4190-8103)
NFPA72-1999 proprietary receiving and Central Station applications require the
following additional equipment:
• A Model 4190-8103 Information Management System.
• A La Marche Uninterruptible Power Supply (UPS), Series A-31 and
A-36D.
• A Simplex printer that is a UL-listed control unit accessory.
• A Sur-Guard III DACR with Installation Manual, for Central Station
Applications only.
The following features that are supported by the Sur-Guard System III are not
supported in the IMS:
Caller ID SK FSK1 SIS Protocol 2
Sescoa Super Speed ITI International Caller ID
Ademco High Speed FBI Westec
Acron DMP Surtec
SK FSK2 10 digit acct contact ID Calling Name
Continued on next page
System Requirements
System Requirements for
Windows 2000 Computers
Additional Hardware
Requirements (Central
Station Receiving Fire
Applications)
Sur-Guard System III
DACR/IMS Limitations
To Next Page
Loading...
Need help?
General
