Simpsons SC213 - CYLINDER HEAD (DISMANTLING); To Remove Valves; INSPECTION; Valves and Valve Seats

51
SC213 Diesel Engines
20. Replace the push rods, rocker shaft assembly, and
tighten the securing nuts.
22. Set the valve tip clearance to 0.15 mm (0.006 in.).
(Fig.K.21 )
23. Fit the cylinder head cover, breather pipe hose, air
inlet connection and exhaust pipe.(Fig.K.22 )
21. Fit the injector assembly and high pressure pipes.
(Fig.K.23 )
Fig: K.21
Fig: K.22
Fig: K.23
Fig: K.24