Simrad ce32 mkii - Page 106

25° changes in present course or heading.
F With cursor on chart, ’Orientation’ will always be presented as ’NORTH
UP’.
NORTH UP
- will present the chart as north up.
HEAD UP - the chart will automatically turn, so your actual course (COG) is up.
If a compass is connected, the reference will automatically change to heading
(compass).
NAV UP - the chart will automatically turn, so your bearing to destination is up.
0ORT3TARBOARD Left (red) / Right (green).
0OSITION Display position as LAT/LON, Loran C or decca lanes.
2ESTARTTOAPPROACHINGPOINT Will automatically re-calculate the navigation
data from current position to approaching point.
2HUMBLINE The straight line to a waypoint on a chart /
2OUTENAME Each route can be given a name for easy identification.
2OUTENUMBER Each route is assigned a route number.
2OUTEPOINTNO When waypoints are inserted as part of a route, they will also
be given a route point number eg. WP8 could be the third point in a route ie.
route point number 3.
3HOWSCALE Setting ’Show scale’ to ON in ’Chart setup 2’ will add a small
line to the chart display indicating that the length of the line equals a certain
number of nautical miles / km.
3peed = Speed Over Ground, measured in knots, km, mi.
3TARBOARD0ORT Right (green) / Left (red).
4&4 Thin-Film Transistor (Active matrix).
54# Universal Time Coordinates, which is equal to standard time in London
!PPENDIX! #%-+))'LOSSARYOFTERMS
106