!LMANAC A satellite’s almanac data, is data which determines an approximate
lane for satellites in orbit. The almanac data is used by the GPS receiver to find
and lock onto the satellite signal. The CE32 MKII has a built-in basic almanac.
!UTOCHARTSELECT When sailing with ’Auto chart select’ ON, you will always
have a chart presented. But when set to OFF, the scale will have highest prior-
ity i.e. changing to overzoom and grid when no chart is available in the same
scale or close to.
!UTOCURSORSWITCHOFF If the chart cursor has not been moved for a full 5
minutes, the cursor will turn off and the ship’s position will be centered on
the screen. The preset 5 min. time-out is adjustable in Chart setup 2.
!UTOTRACKPOINTSHIFT Will automatically shift to the next trackpoint in the
track and provide new steering details (Track nav.)
!UTOWAYPOINTSHIFT Will automatically shift to the next waypoint in the route
and provide new steering details.
!6. Approximate Velocity Necessary - to arrive at a specific waypoint at a
specific time.
"earing The direction of where to go eg. towards a specific waypoint.
#HARTSCALEFACTOR An additional zoom function, which can be set to 1 for
normal, 1/2 for better overview of chart area, and 2 for close-up - without
changing to a different chart level.
#ourse = Course Over Ground, magnetic or true. The direction of which the
vessel is moving.
$EFAULT "Typical" value settings preselected from the factory.
D'03 Differential data is received from external receiver.
$'03 The position is being corrected by differential data.
%4! Estimated Time of Arrival - at a specific waypoint if keeping a steady speed.
!PPENDIX! #%-+))'LOSSARYOFTERMS
104
To Next Page
Loading...
Need help?
General
