Simrad ce32 mkii - Waypoint;Route Menu Overview

)FREQUIREDGOTOANDSELECTADIFFERENTTRACKPOINTAS
THEAPPROACHINGPOINT
'OTOANDCHOOSESAILINGDIRECTIONINTRACK
3TARTNAVIGATING
Refer to section 4.1.2 Navigation display, 4.1.3 ETA &
AVN, and 6.1.4 Set & drift.
4OSTOPNAVIGATINGFROMCHARTDISPLAYOR
-press [MENU], [4], and select ’Turn NAV OFF’.
The waypoint/mark program features 999
points, 17 different symbols, and location names.
The waypoints can be organized into 30 routes
or sailplans of max. 99 waypoints in one route.
Waypoints can be entered as cursor plots directly
on the chart, or as coordinates via the keypad.
Depending on your situation there are several ways you
can insert/plot and edit marks and waypoints:
1. Plot cursor position on chart by means of the [PLOT]
key. Refer to section 3.1.1 "PLOT function" and 4.2.2.
7!90/).42/54%-%.5
3:
WP/RTE
-ARK70LIST
2:WP used in routes
3:Delete group of WPs
4:Route
5:Route calculation
6:Trackplot
7:Line
8:Target
9:Data transfer
+/-
+/-
ENT
3GOTO
-ARKSANDWAYPOINTS
#HAPTER #%-+))7AYPOINTSANDNAVIGATION
48