Simrad ce32 mkii - Editing and Deleting Waypoints

)NSERTLATITUDEOVERWRITESEXISTINGFIGURESTOGGLE.3
)NSERTLONGITUDETOGGLE%7OR
Use cursor to move around in display, and:
CHANGEFROM,!4,/.TO,ORAN#
-correct Loran C chain must be preselected (sec.3.2.5)
#HOOSEBETWEENSYMBOLS
-refer to section 4.2.2.
#HANGENAMEOFWAYPOINTMAXCHARACTERS
-refer to section 4.2.2.
#HANGECOLOROFSYMBOL
#OMPLETEWAYPOINTENTRY
It will be possible to edit a mark/waypoint after it was
saved in the WP list. There are two ways to approach
the editing:
1. Edit mark/waypoint via chart.
2. Edit mark/waypoint via WP list.
%DITMARKWAYPOINTVIACHART
If Chart display is not in current display, press [GOTO]
!CTIVATECURSORANDLOCATEWAYPOINT
/PENFOREDITING
- see pop-up window on next page.
+/-0-9
0-9
+/-
+/-
+/-
A-Z
+/-
ENT
%DITMARKORWAYPOINT
KEYSTOPRESS
ENT
#HAPTER #%-+))7AYPOINTSANDNAVIGATION
54