Simrad ce32 mkii User Manual

The CE32 MKII has 2 in/out ports,
which can be set individually to
NMEA 0183, 0182, 0180, and
Dataline (IS11), DGPS, etc.
3ELECT )NTERFACESETUP.-%! 
or
3ELECT )NTERFACESETUPREMOTE 
Example:
Use the cursor to move
around in the display and
select new values by
means of the [+/-] keys.
Refer to next page for fur-
ther details.
)NTERFACESETTINGS
6:
SETUP
1:Speed alarm, units and language
)NTERFACESETUP.-%!
3:Interface setup remote
4:Interface setup alarm/log
5:Wind display
6:Set & drift
7:Display color
8:TideTracker (US version)
)NTERFACESETUP
KEYSTOPRESS
Interface setup NMEA: NMEA0183
Input (pin 3,4): NMEA0183
Heading: HDT OFF
Water speed: VHW ON
Water temperature: MTW OFF
True wind: VWT ON Relative wind: MWV ON
External position, course and speed: OFF
Datum 000: World Geodetic System 1984
Position: GLL ON
Course: VTG ON
Speed: VTG ON
Output (pin 1,2): NMEA0183
APB ON BWR OFF GGA OFF GL2 OFF GLL ON
RMC/RMB ON VTG ON XTE OFF ZTG OFF
ZDA OFF WPL OFF RTE OFF RNN OFF VHW ON
DBK ON DBS OFF DBT OFF DPT ON MTW ON
MENU 6,2
MENU 6,3
#%-+)))NTERFACINGANDMASTERRESET #HAPTER
85

Simrad ce32 mkii Specifications

General

Brand	Simrad
Model	ce32 mkii
Category	GPS
Language	English