Simrad ce32 mkii - Page 86

To change preset interface settings:
4OGGLEBETWEENAVAILABLEINTERFACESETTINGSSEEBELOW
'OTOANDTOGGLEBETWEENSENTENCESSEEBELOWORSET
THEM/&&/.
#ONFIRMENTRYANDCONFIRMWARNINGOR
EXITFUNCTIONWITHOUTMAKINGANYCHANGES
NMEA port settings:
•NMEA0183 (see listing below)
•NMEA0182, position and autopilot data.
•NMEA0180, autopilot data only.
•DATALINE (IS11)
•DGPS - input from external DGPS receiver.
REMOTE port settings:
•NMEA0183 (see listing below)
•DATALINE (IS11)
•REMOTE connection to dual station
F NMEA output is available at all settings, except
when built-in DGPS is in use (External DGPS can be
selected via the NMEA port).
NMEA 0183 version 2.00 output:
GLL Geographic position, latitude/longitude
GL2 Geographic position, with 2 decimals
GGA Global Positioning System fix data
APB Autopilot sentence "B"
BWR Bearing and distance to waypoint, Rhumbline
BWC Bearing and distance to waypoint, Great circle
RMB Recommended minimum navigation information
RMC Recommended minimum specific GPS data
VTG Course over ground and ground speed
XTE Cross-Track-Error, measured
ZTG UTC & time to destination waypoint
+/-
ENT
+/-
ENT
MENU
#HAPTER #%-+)))NTERFACINGANDMASTERRESET
86