In case this INFO window appears on the screen, it’s
because the cursor is not placed on the exact right spot.
Move the cursor slightly, and try pressing [ENT] again.
If you want to place it on a waypoint symbol which is
part of a route, make sure the cursor does not touch any
of the route lines, as it otherwise will be the INFO win-
dow for the route and not the waypoint which is called
forward.
7ITHCURSORPLACEDONAWAYPOINT the INFO window
(called forward by [ENT], [GOTO]) will inform of which
options are available for editing of the waypoint.
Changing the position of a waypoint will also update
the WPlist with the new position. Deleting a waypoint
from a route will not delete the waypoint from the WP-
list.
%DITMARKWAYPOINTVIA70LIST
,OAD7AYPOINTLIST
0LACETHECURSORINTHENUMBERORNAMEFIELD
+EYINTHENUMBERNAMEOFTHEWAYPOINTYOUWISHTO
EDIT
/PENFOREDITING
It is now possible to change the position, symbol, name
and color of the selected waypoint.
)NSERTNEWVALUESORTOGGLEBETWEENEXISTINGVALUES
#ONFIRMEDITING
WP966 found.
Move: cursor
+ GOTO
Edit: GOTO
Delete from
route: CLR
Exit: MENU
110nm
1:6600000
Cursor is not
placed on WP
or route.
Move cursor
and try again.
3,1MENU
+/-0-9
ENT
ENT
+/-0-9
#%-+))7AYPOINTSANDNAVIGATION #HAPTER
55