Simrad ce32 mkii - Track Navigation and Plotting

To start the track navigation will require that the chart
display is active, and the tracking function for the track
in question is set to OFF. With cursor OFF, the system
will search for nearest trackpoint to the ship.
!CTIVATECHARTDISPLAY
With track information shown on chart (see section
3.1.4) check the number on the track so you can set
Tracking to OFF (see section 4.2.7) for that particular
track before you can start navigating.
0LACETHECURSORINTHEVICINITYOFTHETRACKPOINTYOU
WISHTOGOTO
3ELECT4RACKNAVIGATIONFROMCHARTDISPLAYOR
-press [MENU], [4], [6], and select Track from menu
Number  indicates
that the track’s number is
 and the nearest track-
point to the cursor/ship is
number .
Auto trackpoint shift set
to ON will, when reaching
the approaching track-
point, automatically pro-
vide navigational data to
the next point in the track.
Auto trackpoint shift can be set to OFF if you wish to re-
ceive an alarm when reaching the approaching track-
point and then manually accept the next trackpoint
before receiving the new steering data.
4RACKNAVIGATION
KEYSTOPRESS
Track: 4 . 126
Name:
Position: 56°52.819N 9°50.255E
Bearing to trackpoint: 143m
Distance to trackpoint: 0.23 nm
Direction in track: FORWARD
Auto trackpoint shift: ON
Start navigation: ENT Exit: MENU
GOTO
GOTO 4
#%-+))7AYPOINTSANDNAVIGATION #HAPTER
47