Simrad ce32 mkii User Manual

0OSITIONSETUP
,OAD 0OSITIONSETUP DISPLAY
-ANUALANTENNAALTITUDE is preset to 5m. Insert actual
antenna height to achieve uptimum position accuracy.
!LTITUDEMODEcan be set to automatic for cars, trucks
and aircraft, but should stay on manual for ships.
$ISPLAYDEPTH9%3 Depth will be shown when
NMEA depth data is received from connected
transducer. -See also section 7.1.1.
$'03INPUTFORMAT can be set to 24#- (built-in
receiver plus standard receivers, incl. RS5660/
RS5665), or 2324#-.
$'03 Data counts up slowly when correct DGPS data
is received. A break in the data flow will reset the
counter. Maximum number of received DGPS data
(will be reset by power off/on).
Test counts up slowly when any data is received. (Will
not be displayed after activating %.4 /PENFORCHANGE
3PEEDANDCOURSEFILTERLEVEL There is a speed filter of
10 steps available (0= fast response, 9= stable reading).
/PENFORCHANGE
'OTOTHEFUNCTIONYOUWISHTOALTER
4OGGLETHEFUNCTIONINSERTFIGURES
#ONFIRMENTRY
ENT
0-9
ENT
2,7MENU
+/-
#HAPTER #%-+))#HARTANDPOSITIONMENUS
30

Simrad ce32 mkii Specifications

General

Brand	Simrad
Model	ce32 mkii
Category	GPS
Language	English