Simrad ce32 mkii - Page 39

-the active WP (last en-
tered) in the WP list is
automatically suggested,
if acceptable press [PLOT]
or..
KEYINTHEFIRSTWAYPOINTSCROLLTHROUGHTHE70LISTTO
SELECTTHEPOINT
)FREQUIREDGOTOANDSET84%LIMITFOREACHLEG
The XTE alarm limit can be changed in [MENU], [4]+[2].
)FREQUIREDGOTOANDSETNAVIGATIONMODE
- toggle between Rhumbline and Great circle, each leg
can be set individually for composite route navigation.
(See 6.1.1 Navigation setup).
)NSERTWAYPOINTINROUTE
+EYINLOCATENEXTWAYPOINTNUMBERFROMTHELIST
)NSERTNEXTWAYPOINTETC
)FDESIREDUSECURSORTOGOTOANDSELECTNEWCOLORFOR
COURSELINEOR84%ANDTOGGLETHEFUNCTIONS/./&&
'OTONAMEFIELDANDINSERTNAMEOFMAXCHARACTERS
- refer to section 4.2.2. The name field will automatic-
ally contain the names (if any) of the first and last way-
point in the route.
Set up route: 2.01
Name:
Course line: OFF XTE: OFF
**°**.***N ***°**.***E
**°**.***N ***°**.***E
**°**.***N ***°**.***E
**°**.***N ***°**.***E
New WP. XTE: 0.50nm Nav.: RHUMBLINE
992 x 57°03.000N 9°50.000E
Insert: PLOT Replace: GOTO
Delete: CLR Delete route: WIN
Accept: ENT Exit: MENU
0-9
0-9
+/-
0-9
+/-
PLOT
+/-
PLOT
+/-
A-Z
#%-+))7AYPOINTSANDNAVIGATION #HAPTER
39