Simrad ce32 mkii - Page 41

See section 4.1.3 ETA & AVN, and 6.1.4 Set & drift.
Press [GOTO] if you wish to make any changes i.e. Ad-
vance to next WP, Restart to approaching point, Turn
NAV OFF, etc.
This example shows the vessel in
relation to the route points 01.05,
01.06, 01.07. If you can go in a
straight course line (A) to point
01.06, you select route no. 01 and
route point no. 06, direction is ’for-
ward’, and you say ’YES’ to navi-
gate from POS (current position).
If you need to go back to the original course line (B),
you will also select route no. 01 and route point no. 06,
direction is ’forward’, but you say ’NO’ to navigate
from POS (toggle with +/-), and confirm by pressing
the [ENT] key.
To stay well informed during navigation, the Route cal-
culation display will provide information of how long
it takes to go from one point to another, total distance,
arrival time, etc.
,OAD2OUTECALCULATIONDISPLAY
-see next page.
X
X
X
01.05
01.06
01.07
B
A
2OUTECALCULATION
KEYSTOPRESS
GOTO
3,5MENU
#%-+))7AYPOINTSANDNAVIGATION #HAPTER
41