Speed stability and time of response can be adjusted in
;-%.5=, [=:Position, ;=:Position setup,;%.4=, and use
cursor key to go to ’Speed filter level’ to adjust the set-
ting, confirm with ;%.4=.
(OWTORESETANALARMThe same procedure applies to
all activated alarms in the system:
2ESETALARM
3ETUPFORUNITS - The depth/altitude can be set to me-
tres (m), feet (ft) or fathoms (fm).
Distances can be calculated in nautical miles (nm), kilo-
metres (km) or statute miles (mi).
The speed can be shown in knots (kn), kilometres/hour
(kh) or miles/hour (mh).
The temperature can be shown in Celcius or Fahrenheit.
F 3OFTWAREVERSION indicates which version is in-
stalled in the unit.
7).CHANGEINTERVAL - can be set to anywhere be-
tween 02 to 99 seconds. Refer to ’Rotation of WIN-
dows’ in section 2.2 for more details on how the
function works.
$ISPLAYTEXTIN - as standard the CE32 MKII is sup-
plied with a choice of display languages:
English (GB), Danish (DK), Swedish (S), German (D),
French (F), Spanish (E), Nederlands (NL), Italian (I),
English (US), and Portuguese (P).
CLR
#HAPTER #%-+))3ETUP
82
To Next Page
Loading...
Need help?
General
