Simrad GN70 User Manual

| 37
System Conguration | GN70MX610/MX612 Operator and Installation Manual
How to RESET the SIMRAD Antenna: (MX521, MX521A, MX521B, HS80A, MX575C &
MX575D)
1. Press the MENU key.
2. Scroll to Tools & Settings, press ENT.
3. Scroll to GPS icon, press ENT.
4. Scroll to Antenna Reset menu, press ENT.
5. Select Cold Reset or Factory Default, press ENT.
Where:
• Cold Reset - sets the baud rate to 4800, NMEA messages to default and clears the oscillator,
ephemeris and almanac data
• Factory Default - sets the baud rate to 4800 and sets the NMEA messages to default
¼ Note: Resetting the antenna will automatically change the baud rate of the antenna and the
MX61xJB port 3 to 4800 baud. When normal communication between the MX antenna and
the Junction box is restored, they both will change to 19,200 baud without user intervention.
Normal operation of the system will be restored after 90 seconds.
How to restore the MX61x display to default settings:
1. Press the MENU key.
2. Scroll to Tools & Settings, press ENT.
3. Select SYSTEMS icon, press ENT.
4. Scroll to Restore defaults, press ENT.
5. Place check mark on each item you want to reset by scrolling to it and pressing the ENT key.
6. Scroll to the OK button and press ENT.
7. The MX61x CDU will restart.
8. Press the PWR key and hold it down until it beeps. Press the PWR key momentarily to stop
the beeping.
9. Turn the power ON by pressing the PWR key momentarily.

Simrad GN70 Specifications

General

Brand	Simrad
Model	GN70
Category	Marine Equipment
Language	English