Simrad NSO evo3S MPU User Manual

• Access point mode allows you to connect the WiFi module with your phone/tablet via the
Link app.
External WiFi
Use to enable or disable the external WiFi.
WiFi networks
Shows the WiFi network connection status. If the MFD is connected to the internet (WiFi
hotspot), the hotspot name (SSID) is shown.
External hotspot
Enables the external WiFi module to act as a hotspot. When acting as a hotspot other smart
devices can connect to it and access the internet or other smart devices.
Hotspot settings
Select to display the external WiFi module name (SSID) and key. Only available when the
external WiFi module is set to access mode.
Remembered hotspots
Displays hotspots the unit has been connected to in the past.
Remote control permissions
Lists remote controller connection information. Select to give (one time or always) or remove
a remote controller permission to control the unit.
Advanced
Tools are available within the software to assist in fault-finding and setting up the wireless
network.
128
Internet connection| NSO evo3S MPU Operator Manual

Simrad NSO evo3S MPU Specifications

General

Video Output	2 x HDMI
Connectivity	Wi-Fi, Bluetooth
Operating System	Linux
Ethernet Ports	2
USB Ports	2
Operating Voltage	12/24V DC
Power Supply	12/24V