• Select the track in the Tracks dialog and set the color for the entire track in the Edit Track
dialog.
• Select to let the system color the track based on source data and high/low settings. Refer
to "Color tracks based on data" on page 28.
C-MAP Embark
You can access the C-MAP Embark web site from a PC or use the C-MAP Embark app on your
smart device to manage:
• waypoints
• routes
• tracks
Use the unit's C-MAP Embark feature to synchronize between the unit and C-MAP Embark.
Requirements
• An account with C-MAP Embark
• To synchronize, the unit must be connected to the internet.
Synchronizing
To synchronize the MFD and C-MAP Embark, open the C-MAP Embark feature from the
System Controls dialog or the Services settings dialog.
After sign-in, the system advises the last time synchronizing occurred and the following
options are available:
• Change - use to change sign-in credentials
• Auto Synchronize - synchronizing occurs periodically in the background when connected
to the internet
• Synchronize now - synchronizing occurs immediately
Waypoints, routes, and tracks | NSO evo3S MPU Operator Manual
41
To Next Page
Loading...
