Simrad NSO-II User Manual

88 |
BEP CZone | NSO-II Operator Manual
BEP CZone
The NSO-II system integrate with BEP’s CZone system used for controlling and monitoring
a distributed power system on your vessel.
A separate manual will be provided with your CZone system. Refer to this documentation
and to the NSO-II Installation manual for how to install and congure the CZone system.
BEP CZone panel
Quick access to CZone panel from Pages
When the CZone system is connected and congured, the CZone icon will be shown on
the Pages overview panel (Home). This icon gives access to CZone panel, providing icons
for CZone modes.
CZone modes
The CZone modes provide a one press functionality that allows multiple circuits to be
controlled eciently. The modes are congured during installation of the system.
All available modes will be displayed on the CZone panel.
If there are more than 6 modes congured on screen the rest of the modes will move to
the More Modes option.
Intuitive CZone modes status icon
The CZone modes provide a one press functionality that allows multiple circuits to be
controlled eciently. The modes are typically congured during installation.
Up to 6 commonly used modes can be displayed on the CZone panel. If more than 6
modes are congured, the rest are accessible under More Modes... option.
Mode is active
Mode is inactive
16

Simrad NSO-II Specifications

General

Brand	Simrad
Model	NSO-II
Category	Marine Equipment
Language	English