Simrad NSO-II User Manual

| 97
GoFreeTM wireless | NSO-II Operator Manual
Enable/disable wireless control of NSO-II
1. Download the Simrad GoFree Controller & Viewer App from the application store to the
wireless device.
2. Start the App, and tap the NSO-II icon in the GoFree Controller page to request remote
control of the NSO-II.
The rst time you request control from the wireless device, the NSO-II will prompt you to
conrm remote control from this device.
You have the following options:
Yes Allows control from the wireless device as long as the device is
connected to the WIFI-1 network.
You will have to request remote control again if the wireless device later
re-connects to the WIFI-1 network.
No Allows no control from the wireless device. The NSO-II display can be
viewed on the wireless device, but no operation is allowed.
Always Allows control of the NSO-II from this wireless device until you choose to
disable the control. See description later in this section.
When control is conrmed, the connection is immediately established.
All wireless devices that are allowed to control the NSO-II are listed in the Wi device list.
Disabling wireless control
You disable wireless control from a remote device as follows:
1. In the device list, select the wireless device you want to disable
2. Uncheck the Always allow option

Simrad NSO-II Specifications

General

Brand	Simrad
Model	NSO-II
Category	Marine Equipment
Language	English