Section 04 ENGINE
Subsection 04 (DISASSEMBLY/ASSEMBLY)
MMR2000_119_04_04A.FM 04-04-11
Crankcase
Verify that locating sleeves no. 25 are in place.
Install gasket no. 26 on crankcase.
Finalize crankcase assembling with crankcase
cover no. 1. Torque screws in a crisscross se-
quence to 12 N•m (106 lbf•in).
NOTE: To protect seal and ease crankcase cover
installation, apply grease on crankcase cover seal.
Verify that oil drain bolt no. 27 and both oil filler
caps no. 28 are in place.
To Next Page
Loading...
