To Next Page

To Previous Page

6 System Settings

6.1 Display Settings

6.1.1 Setting the Display Language

Available display languages

The display languages of the ClusterController are German and English. The default

language is English.

Procedure:

1. Call up the login page of the ClusterController in the web browser.

2. Select the desired language in the upper area of the login page.

3. Log in either as User or as Installer with the respective system password of the user group.

This implements the language change on the user interface and on the display of the

ClusterController.

☑ The display language and the user interface language of the ClusterController are changed.

If you have selected a language other than German via the user interface, the display

language will be English.

6.1.2 Adjusting the Display Contrast

1. Call up the display view Settings. To do this, simultaneously press and hold the [OK] and [

ESC] buttons on the keypad for two seconds.

☑ The display view Settings opens.

2. Select the line Display Contrast and use the arrow buttons to adjust the desired display

contrast:

Arrow button Explanation

▸ Increases the display contrast

◂ Reduces the display contrast

3. To exit the display view Settings, press [ESC].

6.2 Setting the User Interface Language

1. Select the ClusterController in the system tree and select the menu Settings in the device

menu.

2. Select the parameter group Device > Country settings.

3. Select [Edit].

4. In the drop-down list Language, select the desired language. This changes the display

language to English if you choose a user interface language other than German.

5. Select [Save].

6 System Settings

SMA Solar Technology AG

User ManualClusterController-BA-en-1536

SMA CLUSTER CONTROLLER User Manual

Other manuals for SMA CLUSTER CONTROLLER