SMA CLUSTER CONTROLLER User Manual

• Select the desired SMA Modbus profile and select [Open].
☑ The file name of the SMA Modbus profile is displayed in the field Update SMA
Modbus profile (*.xml).
• Select [Refresh].
5. To update the user-defined Modbus profile, perform the following steps:
• In the field Update user-defined Modbus profile (*.xml), select [Browse...].
☑ The file selection window opens.
• Select the desired Modbus profile and select [Open].
☑ The file name of the user-defined Modbus profile is displayed in the field Update
user-defined Modbus profile (*.xml).
• Select [Refresh].
Saving the System Configuration
1. Select the ClusterController in the system tree and select the menu Update and save in the
device menu.
2. Select the parameter group Modbus.
3. To save the automatically created system configuration, select [Save automatically
generated system configuration (sysplant.xml)].
4. To save the user-defined system configuration file, select [Save user-defined system
configuration (usrplant.xml)].
Updating the System Configuration
1. Log into the ClusterController as Installer.
2. Select the ClusterController in the system tree and select the menu Update and save in the
device menu.
3. Select the parameter group Modbus.
4. In the field Update user-defined system configuration (*.xml), select [Browse...].
☑ The file selection window opens.
5. Select the desired system configuration file and select [Open].
☑ The file name of the system configuration file is displayed in the field Update user-
defined system configuration (*.xml).
6. Select [Update].
12 Modbus Configuration
SMA Solar Technology AG
User Manual 61ClusterController-BA-en-15

SMA CLUSTER CONTROLLER Specifications

General

Data Logging	Yes
Display	LCD
Power Supply	24 V DC
Remote Monitoring	Yes
Protection Class	IP20
Communication Interfaces	Ethernet
Product Type	Controller
Manufacturer	SMA