12 Troubleshooting
SMA Solar Technology AG
Operating manualEVC22-3AC-20-BE-en-1094
12.1.34 Event 10109
Event message:
• Time adjusted / new time
12.1.35 Event 10111
Event message:
• Update to version ## successful
Explanation:
The firmware update was completed successfully.
12.1.36 Event 10114
Event message:
• The device has been reset to the factory setting.
Explanation:
The configuration of the product has been reset to the default settings.
12.1.37 Event 10207
Event message:
• New device [##] registered
Explanation:
The displayed product was included in the system of the communication product.
12.1.38 Event 10222
Event message:
• Parameter change for parameter # was initiated by user # via EVC##-#AC-10 from value # to
#.
Explanation:
Parameter change was initiated.
To Next Page
Loading...
