SMART LightRaise 60wi - Page 30

C H A P T E R 3
Using your interactive projector
22 smarttech.com/kb/170295
Setting Use Notes
Basic Audio Control menu
Line Out Turns the audio output jack On or
Off.
The default is On.
Microphone Turns the microphone input jack On
or Off.
The default is On.
Speaker Turns the internal speaker On or
Off.
The default is On.
Microphone Volume Adjusts the projector’s microphone
volume amplification from 0 to 40.
The default is 20.
Main Volume Adjusts the volume from 0 to 40. The default is 20.
Mute Turns the projector’s audio output
mute function On or Off.
The default is Off.
If you mute the projector’s audio
output and then increase or
decrease the volume, the volume
is restored automatically. You
can prevent this from happening
by disabling the Line Out above.
Advanced Opens the Advanced Audio
sub-menu where you can enable
and disable the microphone input
and the speaker output for each
display mode. Further details in the
following rows.
Advanced Audio sub-menu
VGA1 Mic Enables or disables the microphone
input jack when using the VGA1
input.
VGA1 Speaker Enables or disables the audio
output jack when using the VGA1
input.
HDMI Mic Enables or disables the microphone
input jack when using the HDMI
input.
HDMI Speaker Enables or disables the audio
output jack when using the HDMI
input.
Composite Mic Enables or disables the microphone
input jack when using the
Composite input.